- 您现在的位置：买卖IC网 > Sheet目录1168 > 71M6531F-DB (Maxim Integrated Products)BOARD DEMO 71M6531F
FDS 6531/6532 005
Data Sheet 71M6531D/F-71M6532D/F
the slave’s address, it sets the 9 bit to 1, causing a serial port receive interrupt in all the slaves. The slave
addressing the slave, the host outputs the rest of the message with the 9 bit set to 0, so no additional
The feature of receiving 9 bits (Mode 3 for UART0, Mode A for UART1) can be used as handshake signals
for inter-processor communication in multi-processor systems. In this case, the slave processors have bit
SM20 ( S0CON[5] ) for UART0, or SM21 ( S1CON[5] for UART1, set to 1. When the master processor outputs
th
processors compare the received byte with their address. If there is a match, the addressed slave will
clear SM20 or SM21 and receive the rest of the message. All other slaves will ignore the message. After
th
serial port receive interrupts will be generated.
UART Control Registers:
The functions of UART0 and UART1 depend on the setting of the Serial Port Control Registers S0CON
Since the TI0, RI0, TI1 and RI1 bits are in an SFR bit addressable byte, common practice
would be to clear them with a bit operation, but this must be avoided . The hardware implements
bit operations as a byte wide read-modify-write hardware macro. If an interrupt occurs after
the read, but before the write, its flag will be cleared unintentionally.
The proper way to clear these flag bits is to write a byte mask consisting of all ones except for
a zero in the location of the bit to be cleared. The flag bits are configured in hardware to ignore
ones written to them.
Table 17 : The S0CON (UART0) Register (SFR 0x98)
Bit
Symbol
Function
The SM0 and SM1 bits set the UART0 mode:
S0CON[7]
S0CON[6]
SM0
SM1
Mode
0
1
2
3
Description
N/A
8-bit UART
9-bit UART
9-bit UART
SM0
0
0
1
1
SM1
0
1
0
1
In Modes 2 and 3 it is the 9 data bit received. In Mode 1, SM20 is 0,
S0CON[5]
S0CON[4]
S0CON[3]
S0CON[2]
S0CON[1]
S0CON[0]
SM20
REN0
TB80
RB80
TI0
RI0
Enables the inter-processor communication feature.
If set, enables serial reception. Cleared by software to disable reception.
The 9th transmitted data bit in Modes 2 and 3. Set or cleared by the
MPU, depending on the function it performs (parity check, multiprocessor
communication etc.)
th
RB80 is the stop bit. In mode 0, this bit is not used. Must be cleared by
software.
Transmit interrupt flag; set by hardware after completion of a serial transfer.
Must be cleared by software.
Receive interrupt flag; set by hardware after completion of a serial reception.
Must be cleared by software.
Table 18: The S1CON (UART1) register (SFR 0x9B)
Bit
Symbol
Function
Sets the baud rate and mode for UART1.
S1CON[7]
SM
SM
0
1
Mode
A
B
Description
9-bit UART
8-bit UART
Baud Rate
variable
variable
The 9 transmitted data bit in Mode A. Set or cleared by the MPU,
S1CON[5]
S1CON[4]
S1CON[3]
Rev 2
SM21
REN1
TB81
Enables the inter-processor communication feature.
If set, enables serial reception. Cleared by software to disable reception.
th
depending on the function it performs (parity check, multiprocessor
communication etc.)
27
发布紧急采购，3分钟左右您将得到回复。
相关PDF资料
71M6533-DB
BOARD DEMO 71M6533
71M6534H-DB
BOARD DEMO 71M6534H
71M6541F-DB
DEMO BOARD 71M6541F
71M6543F-DB-CT
DEMO BOARD 71M6543F-DB-CT
72-CNV-5
CONVERTER RS-232 TO RS-422 5V
72346-001
72346-1-SCA-II REC
72347-001LF
CONN RECEPT SCA2 20POS VERT PCB
72436-001LF
80POS EXT HT. REC SCA-2
相关代理商/技术参数
71M6531F-IM/F
功能描述:计量片上系统 - SoC Residential Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6531F-IM/F3
功能描述:计量片上系统 - SoC
RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6531F-IM/F4
功能描述:计量片上系统 - SoC
RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6531F-IM/FR4
功能描述:计量片上系统 - SoC
RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6531F-IMR/F
功能描述:计量片上系统 - SoC Residential Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6531F-IMR/F3
功能描述:计量片上系统 - SoC Residential Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6531F-IMR/F8
功能描述:计量片上系统 - SoC Residential Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel
71M6531F-MR/F/PE2
功能描述:计量片上系统 - SoC Residential Energy Meter IC RoHS:否 制造商:Maxim Integrated 核心:80515 MPU 处理器系列:71M6511 类型:Metering SoC 最大时钟频率:70 Hz 程序存储器大小:64 KB 数据 RAM 大小:7 KB 接口类型:UART 可编程输入/输出端数量:12 片上 ADC: 安装风格:SMD/SMT 封装 / 箱体:LQFP-64 封装:Reel